When you look at the initial Xbox 360 the DVD drive sits atop the GPU heatsink and contains a stubby SATA cable for the connection, along with a energy cable nearly the same as usually the one when it comes to DVD into the xbox that is original.
Very Very Carefully peel this away to show 2 bare cables (both are ground) and 2 coated cables (data signals).
Reconnect one other end associated with cable to your ribbon cable when you look at the in an identical way. To position the DVD player as observed in this laptop you will have to expand this cable by about 4 to 5 ins. The cable should now prepare yourself to get!
DVD drive energy connector
One other cable going to the DVD drive could be the charged energy connector. It includes an “Eject” sign.
This comprises of a team of black colored cables by having a white plug on each end. It really is more compared to DVD’s SATA cable but nonetheless, in stock type, maybe maybe maybe not for enough time to go the drive extremely far. Observe that the pinouts at both ends for the cable are identical, hence the wires “flip”, or get a get a cross one another from end to get rid of. It is possible to tell which means the cable is intended become placed because of the little track of the medial side associated with plug. More about this later on.
The cable cut in two. Increases as being an art spider that is modern.
- Cut (2) lengths of ribbon cable with 5 strands each. About 5-inches very long must certanly be good.
- Solder each one of the ribbon cables towards the 5 cables on both edges for the plug, as shown above.
- Insulate the cables with electric tape or little items of heat shrink tubing. Needless to say you will need to don’t forget to slip the tubing on before the connection is made by you. Irrespective, heat shrink tubing provides it an excellent clean appearance whenever done. Continue reading Without a doubt about Extending SATA cables when it comes to DVD and disk drive